Back once again to Hinkley’s and ready for our water maker install, we got tied up on their dock. Awaiting us was a cart load of boxes from Amazon and some items sent to us from Seattle, in addition to the water maker, since this was our first opportunity in over a month to have some items shipped to us. (I forgot to take a pic!).
David had already disconnected and moved the batteries, so when the mechanic came aboard, we were ready for him to get started on the install. Thus followed a week where the boat was a complete mess, with tools everywhere! Our bedroom was once again taken over, so we spent a few nights in the front berth.
The install proceeded smoothly, right up until we were running the first cycle, when a bad fitting (from the factory) broke under a high pressure flow, resulting in salt water spraying all over the motherboard, completely frying it. Of course, this was on a Friday, so when David called the distributor for a replacement, we knew we were not going to be able to get it until Monday. In addition, despite this being very clearly a manufacturing issue, Spectra held firm to their position that they are not responsible for “water damage”, which meant the new motherboard would not be under warranty. (Insert angry emoji here).
With little else to do, and the Hinkley’s dock not being suitable to stay on over the weekend (some winds were expected overnight), we decided to head to Valley Cove for the weekend, which was only 2 miles away. This was from a recommendation from some other loopers that we had met at Bar Harbor and had a socially distant conversation with on the dock.
Valley Cove is just a little ways north into Somes Sound (where we holed up safely for Isaias) and was actually a very beautiful spot, possibly my favourite place since Roque Island. The landscape is very reminiscent of PacNW boating and there was no civilization visible from our anchorage spot. Luckily there was also several miles of Acadia National Park trails easily accessible from the beach, so on Sunday we hopped in the dingy aiming to do a short 1 mile loop. As we were dingying to the beach, we were hailed by a couple on a nearby sailboat, who turned out to be from Everett, WA! We chatted with them for a little while from the dingy and they pointed out a different hike along the shore. Once on land, we decided to check out this other hike, which actually was 5 miles, but afforded a fantastic view overlooking the mouth of Somes Sound.
On Monday, we returned to Hinkley’s where the new motherboard was waiting for us. We tied up to a mooring and the mechanic returned for the swap. We finally got everything working and ran a successful cycle topping up our tanks. Having the water maker on board will mean that we can now go for longer on anchor without worrying about our water supplies (we hold only 70 gal), and we can take daily showers if we want!! Ahh, the life of luxury.
As David was re-connecting the batteries, he accidentally touched the positive fuse with a negative battery cable, which blew the fuse, which we didn’t discover until the evening. Turns out, we did not have a spare on board! Luckily when we called in the morning, Hinkley’s had some spares, so we were able to get that fixed.
This morning, we finally cast away from Southwest Harbor and are now heading back south/west to explore some new areas of Maine.
4 thoughts on “Making Water (Potable) and a Return to Somes Sound”
Ugh. Hate it when a straightforward project goes awry.
Nice view from the hike though, and that might not have happened without the troubles.
Yes indeed! We always try to make the best of things 🙂
Always fun and interesting to meet someone from the ‘hood in the most unexpected places. We were in a restaurant in Buenos Aires. After about 20 minutes, a young lady at a table near us said “So, where you guys from?” Turned out she was from Queen Anne!
One of the things we were looking forward to was meeting different folks along the trip. It’s been such a shame that these encounters have been pretty rare due to us avoiding people because of Covid.
You must log in to post a comment.